Diablo chip problem

HD pull'n a GT · 01-18-2007, 06:32 PM

The clip on my switch is broke. It has stayed on for a long time. Yesterday I noticed the led was off. I put the plug back in on the switch and it came back on. This morning I noticed the led was off again. I check the plug and it was plugged in. Is my chipped screwed? How can I test it?

Justin00Stang · 01-22-2007, 10:58 AM

I might have some of the basic diablo switches laying around that I could send, with no LED.

HD pull'n a GT · 03-05-2007, 03:48 PM

I got a switch off a guy on the boards. This is what I have so far. If I start the truck with it on tune 1 or 2 I get no light. If I start the truck with the switch off, I get a green. I then can flip to tune 1 (green) or tune 2 (red). What's the problem?

01-18-2007, 06:32 PM	#1 (permalink)
HD pull'n a GT Registered User Join Date: Aug 2004 Location: Manheim,PA Posts: 59 View this user's gallery iTrader: 0 / 0%	Diablo chip problem The clip on my switch is broke. It has stayed on for a long time. Yesterday I noticed the led was off. I put the plug back in on the switch and it came back on. This morning I noticed the led was off again. I check the plug and it was plugged in. Is my chipped screwed? How can I test it?

01-22-2007, 10:58 AM	#2 (permalink)
Justin00Stang VMP Tuning Supporting Vendor Paid Member Join Date: Jan 2006 Location: Central FL Posts: 187 NLOC member #: 2188 View this user's gallery iTrader: 0 / 0%	I might have some of the basic diablo switches laying around that I could send, with no LED. __________________ Justin Starkey VMP Tuning - Central Florida Lightning & Ford Dynotuning - mail order tuning with SCT Mobile Dynojet 224x with Load Control Phone: 321-206-9369 Email: justin@vmptuning.com 2007 Shelby GT500 691RWHP on pump & 708RWHP on race gas with TVS Blower and VMP mods 2000 Mustang 3.8 A4 TT 450RWHP/475RWTQ @ 17psi, 10.996@127 1.7 60ft @ 17psi stock 3.8 2006 F250 CC 4x4 6.0L 14.3 @ 93 2006 Mustang 4.0 M5 Vortech 15psi 395RWHP/374RWTQ wife's car

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode




Home \| Classified Ads \| Gallery \| Join the Club \| Register on the Forum \| Merchandise \| Supporting Vendors \| Chat

03-05-2007, 03:48 PM	#3 (permalink)
HD pull'n a GT Registered User Join Date: Aug 2004 Location: Manheim,PA Posts: 59 View this user's gallery iTrader: 0 / 0%	I got a switch off a guy on the boards. This is what I have so far. If I start the truck with it on tune 1 or 2 I get no light. If I start the truck with the switch off, I get a green. I then can flip to tune 1 (green) or tune 2 (red). What's the problem?