Activity Stream

Actually you're not disagreeing. A worthwhile scanner would cost way too much but would be the better way to do it. However i'm sure anyone...

I like it

Built trans and that nice convertor you got will hopefully fix that Sent from my SM-G930V using Tapatalk

Local pal started out with s475 like you are looking at He ran it over a year and then sent it in to forced inductions and had it made into a...

My s475 was a bit slow spooling off the line, have never beaten a 1.9 60' I did change to a 1.10 ar housing and still cut a 1.969 60' 😂 I'm guessing...

Really looking forward to some track #s on yours Billy. ;) And I agree again: If you don't know, call a pro. :D

I suggest you talk with professionals. Alot has changed in last few years Spooling a t6 is no issue with right convertor and tuning ...

Percy IL 62272 Sent from my SM-G935V using Tapatalk

Here are a few. I’m in the process of changing to 5x4.5 on this truck too and throwing my old Weld Draglites on

Where are you located Jon?

^^ Agree with all that. ^^

Most pribably don’t agree but I would get a t4 flange turbo. Something pretty big 76/80 but with a big exhaust side. Are you really going to race it...

Well, as i've done several shackle sets on these trucks before (yay iowa) I originally put it together that way, nut on the inside. But then i...

Yeah right. LMAO! About as much a chance of that happening as you and Dennis forming a racing team.

PM me your address. I have the replacement caps to solder in. More than likely all three caps are rotten and need replaced. Easy peasy job if you...

I had a problem with a blown fuse on mine, however there is a difference between the engine harness in 1993 and a 1994/ 1995 on some. That could be...

you could always put a little taller springs upfront

Here

Pulled pcm, no chip. However it does appear a little blue capacitor is messed up

Also vacuum at idle with this cam/combo is 16-17in Is that normal?

The injectors are stock Whole fuel system is minus the adjustable regulator(I’ve tried the stock one again also same issue though) I do not see...

lol

I Sold my truck but I might build another one at some point. Nice to see the old timers still around.

Easy, Greyhound. - - - Updated - - - http://www.shipgreyhound.com/e/pages/Home.aspx

My 393 was speced out for a s484 from forced inductions Sent from my SM-G930V using Tapatalk