Quote:
Originally Posted by SonicHD  OK, so Im a drag racing virgin, and this will be my maiden voyage (Ive always had off-road rigs) So what I want to know is, what will I be required to have for safety inspection? Helmet? Fire jacket? Driveshaft loop? anything else?
I have a Simpson helmet a friend gave me, its a little old though, manufactured in 1994, its snell sa90 rated I think, will this pass? Other than that I dont have any of the other things mentioned above. I want to make sure Ill get through, before I send in the $40 fee.
Any other first timer advice will be greatly appreciated. I believe they are having a test and tune session on the Friday before. I may go hit that up to get my feet wet in hopes I dont completely embarrass myself in front of all you veterans  |
Quote:
from NHRA rulebook:
A helmet is required for the driver of any car or truck running 13.99 seconds or quicker in the quarter mile, and for the rider of any motorcycle. Most drivers can use a helmet meeting SNELL K98, M2000, SA2000, M2005, or SA2005 specifications. Professional category and some alcohol burning vehicles require an SA rated helmet. It is important to note that the helmet rating must be designated on a tag INSIDE the helmet, or sewn to one of the helmet straps. The designation stenciled on the exterior of the helmet is insufficient for NHRA technical inspection. Also, some tracks require a helmet on ALL drivers, so check in advance.
|
I think that helmet will not pass, it's too old.
If you are running slicks you need a drive shaft loop.
If you have a non-stock power adder you'll need a fire jacket.
all depends on your mods, but it doesn't hurt to have all of the above
