Quote:
Originally Posted by 203Cree  If you're in the same boat as me and didn't get the two bolts that hold the console to the frame in the rear, they're 6mm x 1.00 |
Thanks for that info Rob. I got the diameter figured out but hadn't worked on the length yet. I'll be needin' fender style washers too.
Quote:
Originally Posted by 203Cree Be careful with the heat gun on your seatbelt cover. It heats up quick and will deform if you're not paying attention. |
That may have already happened to me. I heated it up and bent and twisted but not happy with how it came out. Another article indicated it wasn't really important as it doesn't show anyway. Doesn't work for me. Gonna investigate the Expedition passenger side inside seat belt to see if it'll work and have a better appearence. They're only around $25 bux and probably cheaper at the place we get our parts from....
Quote:
Originally Posted by 203Cree LMK if you decide to put in a switch panel, I've got a little trick that will set you right up and look hella clean when it's done. I'm sure you remember how mine looks, but here it is agiain.... |
This I'm interested in knowing about. Would like to see what you did. I have the same plan for the front HVAC panel/hole in planning a gauge install.
