i normally post in 1st gen section, but i had a lil project goin that fits in to this section.
the truck had a standard belltech hanger/shackle drop. a lil road trip to so cal last week (1500 miles) netted 2 busted shocks, snapped the top ends off of both shocks.....long story, but got it home with stock length "cheapo" shocks from autozone, installed in the parking lot with 2 cresent wrenches.
anyway, i was planning on doin this with my 1st gen, but "pops" truck got it instead. 3 link roadrace style, coilovers, and a watts link. lowere links use jonny joints in the front, bushings in the rear, top link is rh/lh 3/4x5/8 heim joints. coilovers are qa1's starting out with 550# springs....may be changed to better suit the ride/handling needs. geometry was done with perf trends software. all parts fabricated in my shop.
still finishing up the watts link and rear frame crossmembers, will be framing in for an ATI fuel cell to be added later. but here are the pics so far.
DISSASSEMBLED
SPARE TIRE CARRIER REMOVAL
LOWER LINK/COILOVER MOUNTS
UPPER LINK MOUNT
