We are pleased to offer an affordable option for those looking to replace thier Eaton, with a new plenum/plate system, and retain factory orientation of brackets, linkages, TB, etc..
Can be sold with/without a C&L plenum, or even stock, if you want to reuse your original plenum. Your plenum can be drilled to accept the larger M8 x 1.25" bolts that we use, and bolted down, or, we can weld your plenum to the plate (recommended). Here's what you're looking at..
Plenum plate, WITHOUT C&L plenum bolted/welded in place- $565.00
Plenum plate, WITH C&L plenum bolted/welded in place- $795.00
Both setups require EGR block off plate, as the plenum will sit about 1" lower than factory. Or, you will need to modify your EGR tube, if you wish to keep EGR function.
Travis
Can be sold with/without a C&L plenum, or even stock, if you want to reuse your original plenum. Your plenum can be drilled to accept the larger M8 x 1.25" bolts that we use, and bolted down, or, we can weld your plenum to the plate (recommended). Here's what you're looking at..
Plenum plate, WITHOUT C&L plenum bolted/welded in place- $565.00
Plenum plate, WITH C&L plenum bolted/welded in place- $795.00
Both setups require EGR block off plate, as the plenum will sit about 1" lower than factory. Or, you will need to modify your EGR tube, if you wish to keep EGR function.
Travis